Sök:

Sökresultat:

305 Uppsatser om Bulk density - Sida 1 av 21

Cassava as an additive in biomass fuel pellet production :

In this study, the effects of using fine milled cassava stems as an additive in biofuel pellet production was compared to the effects of refined starch addition. The bulk biomass fuel raw material, to which the additive was added, was a blend of spruce and pine sawdust. An experimental design in the factors cassava/starch content, moisture content and material temperature was used. Measured responses were pellet Bulk density, pellet durability, amount of fines, pelletizer motor current, pellet temperature, die temperature and CV for pelletizer motor current (a measure of process stability). Each response was modeled by multiple linear regression (MLR).

Modellering och styrning av flis till en sulfatkokare

At the Skoghall pappermill, sulphatepaper pulp is produced in a continuous digester originally from 1969. To be able to maintain a high level of production there is a need for a process with few disturbances. Variations in how well the wooden chips are packed in the digester is one form of disturbance. Today there are no available measurements on how well the chips are packed. Instead this is regarded as being constant.

Effekt på mark och gröda av olika bearbetningssystem, med och utan CTF

Swedish agriculture has gone through big changes in the latest 60 years. The farm sizes have increased, which has led to raised tractor and machinery sizes and therefore increasing problems with soil compaction. A method to reduce these problems is to implement controlled traffic farming, CTF. All field operations are then concentrated to specific tracks by using GPS guidance. The aim of this work was to study how the tillage regime, with or without CTF, affects the soil, with the main focus on macroporosity. In Säby close to Uppsala, and Alnarp close to Malmö, randomized block trials has been carried out, and the data has mainly been taken from these trials.

Är kunden lojal eller spontan? :  En studie om lösviktskonfektyr i Sverige

An impulse or unplanned purchase is a decision taken on the spot without further consideration or reflection. It is the spur of the moment that influences the purchase rather than a deliberated decision. Being loyal to a particular brand means a mutual relationship between customer and company created over time which may result in the customer experiencing a higher value and thus prefer a particular brand before another.Bulk confectionary can be characterized as an impulse product because it is purchased at times without any time of consideration or planning. The question that arises is whether all bulk confectionary purchases are unplanned? Through this study it shall be examined whether any brand loyalty actually exists regarding bulk confectionary; does the customer plan its confectionary purchases in beforehand or do most of them occur through impulses? Furthermore, the study will highlight who the customer is of bulk confectionary in Sweden.The survey was conducted through a combination of a quantitative and qualitative method.

Alla ska med : en etnografisk studie om Stena Bulks unika företagskultur

AbstractCorporate cultures have since the 80's, when the phenomenon was associated with a company's economic success, been a frequent research object. Corporate culture is then often described as something that can create efficiency, success and loyal employees. Often discussed about strong corporate cultures are that members in the organization have accepted the same norms, values and goals. Research also mention unique corporate cultures, where no organization is alike, depending their different stories, leaders, backgrounds or geographical locations.?? This study aims, through observations and interviews on an ethnographic basis, to describe the corporate culture in Stena Bulk.

Celltal som mått på mjölkens kvalitet med avseende på mjölkens sammansättning

Mastitis, an inflammation of the udder mainly caused by a bacterial infection, induces an increase in the somatic cell count (SCC) in milk and is consequently one of several factors affecting SCC in milk. In this literature review it is investigated whether SCC; on udder quarter, cow composite or bulk tank milk level, can be used as a quality marker with focus on milk composition in terms of the content of fat, lactose, total protein, casein and whey protein. According to this literature review the relation between SCC and milk composition is not reliable either on udder quarter, cow composite or bulk tank milk level. SCC was related to lactose, casein and whey protein on udder quarter level; lactose and whey protein on cow composite level and lactose on bulk tank milk level.

Do 25 years old skid tracks restrict growth and survival? : a study on growth conditions for the planted regeneration in a rainforest rehabilitation project

The rainforests of the world are important not only to the countries in which they grow but to the world as a whole. They influence oxygen and water circulation as well as carbon sequestration which in turn affect global radiation and global warming. The forest also have great value and in Malaysia as in many other tropical countries large volumes are harvested which leaves great areas of degraded forest with little growth and biological diversity. Due to their low financial value these forests are often transformed and used for other purposes than forestry such as oil palm plantations. The trees are often transported out of the forest using large bulldozers. They are heavy which causes compaction of the forest floor and during transport the top soil layers are moved to improve mobility.

Inverkan av nederbörd, temperatur och frost på årsringens egenskaper hos boreal tall (Pinus sylvestris L.) :

The wide distribution range of our boreal pine (Pinus sylvestris L.) provides a great variation in growing conditions and climate/weather factors that influence the wood development of the trees. A great number of extensive studies have been conducted over the years in order to clarify growth trends of this and other species over more or less wide-ranging areas. In this thesis effects of weather factors were instead compared between different forest stands from the about same geographical location. The effects of precipitation, temperature and frost on the year ring characteristics of pine were studied in the research forest of Svartberget Vindeln, in northern Sweden. The stands differed in site index and silvicultural treatment; fertile ? high stem density, fertile ? low stem density, poor ? high stem density and poor ? low stem density.

Social hållbarhet och förtätning : en kritisk studie i förtätningens sociala paradoxer

Densification is one of the urban visions for sustainable development - a vision that has become a part of the solution to the unsustainable sake dilemma. With the dense city land will be saved, energy consumption reduced and social cohesion improved. The dense city is considered to be ecologically, economically and socially sustainable. Applying an urban design concept has thus proven to be problematic. Density has been found to be a complex concept which is far more complicated than measuring how much built surface that needs to be covered. It is also not disputed what different degrees of densification mean and whether densification in itself is sustainable.

Jämförelse av fyra rundbalspressars packningsförmåga som funktion av grödans torrsubstanshalt :

To succeed, and make money at your animal production you need to feed your animals with high quality fodder. Other condition to succeed is that you keep your production costs at a minimum. To be able to produce baled silage at a low cost it?s very important that the bales have a high density. Density is measured in kg dry matter (DM) per cubic meter. The purpose with this report was to learn more about making silage in round bales and to how much the bale density varies between different brands of round balers.

Röjningsförbandets betydelse för avverkningsekonomin i södra Sverige :

The aim of this work is to demonstrate how the net present value (NPV) at the time of the first thinning depends on the spacing after pre-commercial thinning, and show how net value from first thinning in same stand is influenced. This study is performed with models based on non-distant dependent growth models for single trees. Two different growth models have been used, one for cleaning (pre-commercial thinning) and one for thinning. The first one yields stem density distributed over diameter classes. In the second one, (the thinning model), it is possible to choose when thinning should be done, the thinning method, thinning grade and numbers of thinning.

Effects of storage time, die channel length and moisture content on pellet quality of lodgepole pine (Pinus contorta Dougl. var. latifolia)

The use of renewable resources is rapidly increasing in Sweden, especially the use of fuel pellets. Through pelletizing the energy content per volume unit is greatly increased and the pellets are more homogeneous with regard to moisture content, particle size and density compared to unrefined fuels like forest residues and chips. For further development of the Swedish pellet industry, the use of different assortments from lodgepole pine (Pinus contorta Dougl. var. latifolia) is of particular interest, mainly because of its high volume production.

Identifiering av gallringsbehov med hjälp av flygburen laserskanning :

Thinning is one of the most important silvicultural activities in middle aged forests, partly to minimize damages and partly because it leads to earlier harvesting revenues and increases the value of the remaining trees. There are many different indices used to describe stand density and thereby the need of thinning in forests today. Studies have shown that forest variables can be estimated with high accuracy using airborne laser scanning and it is likely that the method could also be used to estimate forest density indices. In this study, the possibility of using the forest density index ?H² to determine and map priorities for thinning operations for a forest area was examined.

Effects of milking system on plasmin and plasminogen activity in bovine bulk milk

Protein is an important component in various milk products and has a crucial role in the final quality. Excluding non-protein nitrogen, bovine milk contains about 3.3% protein whereas about 80% of this fraction consists of casein. There are four major members in the casein family: ?s1-casein, ?s2- casein, ?-casein and ?-casein. Proteolytic enzymes are the cause of degradation of the economically important milk proteins.

Hur påverkar förtätningen stadens grönstruktur? :

Urban density is not new, but rather one side of the continous processes of change underway in the city. During the urbanizing boom of the industrialization, when the cities grew bigger, the first spaces to be built on were vacant and planted areas in the interior of the district. The gardens that once were there were replaced by yardhouses. The idea of urban density is that a dense city means less distance between residential areas and workplaces, resulting in fewer shipments and travelers, which ultimately leads to lower energy consumption and lower emissions. Urban density may lead to shorter distances, but not necessarily. In the wake of urban density the greenstructures of the city is shattered. The possibilities for green areas to contribute to the health of the city and its inhabitants is dramatically reduced.

1 Nästa sida ->